Corner shelf kits allow you to bring your hanging space right around the corner from one wall to the next.
This corner shelf kit can ONLY be used with 12" deep SuperSlide shelving.
The corner shelf comes with the items highlighted in white in the picture i.e. wall clips, joiner plates, support brackets, corner hanger bar & the corner shelf itself. The corner hanger bar has tapered ends to make joining to straight sections easy. You will need to order 2 x 5647 SuperSlide hanger bar supports for each corner shelf to enable proper support of the corner hanger bar where it joins the straight sections.
The corner shelf is 2" (5cm) high x 18" (45.72) wide x 18" (45.72) deep.
When using corner shelf kits, please remember that they do take up quite a bit of wall space, and you wont want to make the adjoining shelves much shorter than 24" (61cm) as they will be difficult to install and you must also bear in mind that once garments are on their hangers they are approximately 22" wide and therefore, if you have anything less than 22" left once the corner kit is in place you will not gain any hanging space.
Please note that these Corner Kits can ONLY be used with our Fixed Mount System. It is not possible to attached these corner shelves onto our adjustable ShelfTrack Fix System.